Everything you need to originate almost any tubular key in use today is included with the TKM-100:
TKMS451 Dial Indicator
F2MS899 Demonstration Video TKSH107 Chicago/Dynalock/Unican Cam
TKSH109 Fort/American Cam TKMS102 Ace Spacing Plate
TKMS103 Offset Right Plate TKMS104 Offset Left Plate
TKMS105 National Keyset Plate TKMS106 Ace Change-a-Matic Plate
TKMS107 Segal 8 Pin Plate TKMS108 Universal Spacing Plate
F2MS402 1/8" Allen Wrench ASMS003 3/16" Allen Wrench
DCMS402 3/32" Allen Wrench
One Collet For All Your Needs....
The TKM-100 features a collet that can accommodate all three size tubular keys. No fumbling with changing jaws or adapters. Simply tighten the chuck closer - the self adjusting collet easily accepts any size key.
Make Any Type Of Cut And Lots Of Them!
With the TKM-100 you can make regular cuts, ward cuts, and master cuts. The machine is equipped with a carbide cutter, which means you can cut brass or steel and get long cutter life.
Why Code Cut When You Can Duplicate?
Probably more than any other type of key, a tubular key wears very quickly. Due to the constant pressure on the face of the key, even original keys can be off .003" - .005"! By using a duplicator to make a key, an inaccurate copy of a worn key is being made. When you use the TKM-100 to code cut a key, you'll be making an original key, accurate to .001". A precision dial indicator is included with the machine, and decoding takes only a few seconds.
Machines are normally drop shipped from the factory, so shipping charges may be higher.